BS IEC 61892-2:2019

BS IEC 61892-2:2019 Mobile and fixed offshore units. Electrical installations. System design

standard by British Standard / International Electrotechnical Commission, 05/03/2019

More details

Download

PDF AVAILABLE FORMATS IMMEDIATE DOWNLOAD
$161.16

$358.14

(price reduced by 55 %)

Full Description

Scope: This part of IEC 61892 is applicable to system design of electrical installations and equipment in mobile and fixed offshore units including pipeline, pumping or "pigging" stations, compressor stations and single buoy moorings, used in the offshore petroleum industry for drilling, production, accommodation, processing, storage and offloading purposes.

It applies to all installations, whether permanent, temporary, transportable or hand-held, to AC installations and DC installations, without any voltage level limitation. Referenced equipment standards may give voltage level limitations.

This document specifies requirements such as those concerning
- sources of electrical power for manned and unmanned units,
- system earthing, both for low-voltage and high-voltage installations,
- interface for electric transmission systems with power supplied from shore, between interconnected offshore units, and with power supplied by offshore units to subsea installations,
- distribution systems,
- cables and wiring systems,
- system studies and calculations,
- protection against electrical faults,
- lighting,
- energy control, monitoring and alarm systems, and
- turret/swivel.

This document gives information and guidance on topics such as
- applicable examples of HVDC VSC technology, and
- guidelines for illumination level.

This document does not apply to
- fixed equipment for medical purposes,
- electrical installations of tankers, and
- control of ignition sources other than those created by electrical equipment.

NOTE 1 For medical rooms, IEC 60364-7-710 provides specific requirements. Requirements for tankers are given in IEC 60092-502.

NOTE 2 Guidance on protection of non-electrical equipment can be found in ISO 80079-36, ISO 80079-37 and IMO 2009 MODU Code, 6.7.

Cross References:
IEC 61892-1:2019
IEC 62040-3:2011
IEC 61892-6:2019
IEC 61892-3:2019
IEC 60038:2009
BS IEC 61892-3:2019
BS IEC 61892-6:2019
IEC 60947-2:2016
IEC 61892-4:2019
BS IEC 61892-1:2019
IEC 60092-504:2016
IEC 60331-21
IEC 62271-100
IEC 62040-1
IEC 60331-1
IEC 60331-2
IEC 61363-1
IEC 60947-4-2
IEC 60447
IEC 62040-2
IEC 61131-1
IEC TR 60909-1
IEC 61131-2
IEC 60909-0
IEC 60533
IEC 61892-7
IEEE 1012
IEC TS 61936-2
IEC TS 61836
IEC TR 61131-4
ISO/IEC/IEEE 12207
ISO 13849
ISO 80079-37
EN 1838
IEC 62682
ISO 80079-36
IEC 61892-5
ISO 3046-1
IEC 61000-2-4
AWEA 6.1:1989
NFPA 70E
IEC 60529
IEC 62381
IEC 61660-1
IEC 61400
IEC 61936-1
IEEE 1584:2002
DNV-OS-D203
AWEA 3.1:1988
IEC 60364-7-710
IEC 60092-502
IEC 60050
IEC 62271-200
EN 12464-2
IEC 61180
ISO 8468
NFPA 20
IEC 60073
ISO 13702
IEC 60617
ISO 11064
IEC 60904
IEC 62443-2-1:2010
IEC 60092-350:2014
NORSOK S-002:2004 (Rev4)
IEC 60364-4-41:2005
IEC 60079-7:2015
IEC 60364-4-43:2008
IEC 60364-1:2005


All current amendments available at time of purchase are included with the purchase of this document.

Contact us

Cart

No products

Shipping $0.00
Total $0.00

Cart Check out

New products

  •    >>
  •    >>
  •    >>
  •    >>
  •    >>

All new products

Specials

All specials