IEEE 449 : 1998
IEEE 449 : 1998
FERRORESONANT VOLTAGE REGULATORS
Institute of Electrical & Electronics Engineers
Table of Contents
1 Scope
2 References
3 Definitions
4 Auxiliary circuits to provide special features
4.1 Ferroresonant voltage regulator with harmonic filter
(harmonic neutralized)
5 Service conditions
5.1 Environmental
5.2 Mechanical
6 Ratings
6.1 Input rating
6.2 Output rating
6.3 Resonant section rating
6.4 Thermal rating
6.5 Electric strength
6.6 Magnetic radiation
6.7 Acoustic noise
6.8 Corona
7 Nameplate and other markings
7.1 Nameplate
7.2 Nameplate information
7.3 Termination markings
8 Test procedures
8.1 Electric strength tests
8.2 Input characteristic (resonating capacitor connected) tests
8.3 Output characteristics
8.4 Overload characteristics
8.5 Transient excursions (overshoot and undershoot)
8.6 Temperature rise
8.7 External flux field
8.8 Audible sound-level tests
8.9 Polarity
9 Application guide
9.1 Introduction
9.2 Shunt-type ferroresonant regulators
9.3 Specific applications
10 Maintenance guide
11 Bibliography
Abstract
Specifies ferroresonant voltage regulators at relatively constant frequencies and controlled ferroresonant regulators which maintain constant output voltages regardless of variations, in input voltage, frequency, temperature and output load. This standard includes, but is not limited to, the following types of ferroresonant regulators; Series-parallel ferroresonant regulators (electrically connected), Controlled ferroresonant regulators, Series ferroresonant regulators, Ferroresonant transformer regulators (magnetically couples).
General Product Information
| Document Type | Standard |
| Status | Current |
| Publisher | Institute of Electrical & Electronics Engineers |
| Supersedes |
|
